Power Supply

From Nucwiki
Jump to: navigation, search

mcmaster HV inventory

  • Data Design Corp HV 10
  • Bertan 2393A (-1kV @ 4 mA)
  • Bertan PMT-50C (5 kV @ 0.5mA, unshipped / bad seller)
  • Bertan 2325 (1.3 kV @ 3 mA)
  • Capillary electrophoresis supply: 5 kV, 150 mA
  • Ortec (456?) NIM

Programmable

Programmable power supplies for PMT, GM, fusor, etc

Image Vendor Series Model kV mA W Prog Ask
Acton Research PHV400 -1.25 2 Analog
Acton Research PS-445 ?
"Detector Readout/ Computer Interface"

Analog control?
Becton Dickinson PMT-C? 2398A 15 A few of these. Unclear spec, but relatively good deal
Bertan PMT-C? 2393A -1? 4 4 Analog Looks like PMT-10C-N. Early version?
Bertan PMT-C? 2398A
Bertan PMT-C stack 2693A 2398A embedded + other
Bertan PMT-C stack 2698A 2398A embedded
Bertan PMT-C PMT-05C-N -0.5 8 4 Analog
Bertan PMT-C PMT-05C-P 0.5 8 4 Analog
Bertan PMT-C PMT-10C-N -1 4 4 Analog
Bertan PMT-C PMT-10C-P 1 4 4 Analog
Bertan PMT-C PMT-20C-N -2 2 4 Analog
Bertan PMT-C PMT-20C-P 2 2 4 Analog
Bertan PMT-C PMT-30C-N -3 1 3 Analog
Bertan PMT-C PMT-30C-P 3 1 3 Analog
Bertan PMT-C PMT-50C-N -5 0.5 2.5 Analog
Bertan PMT-C PMT-50C-P 5 0.5 2.5 Analog
Bertan PMT-C PMT-75C-N -7.5 0.25 1.9 Analog
Bertan PMT-C PMT-75C-P 7.5 0.25 1.9 Analog
Data Design Corp HV 10 CAMAC Uncommon but nice
Glassman EQ PS/EQ015N072G27 15 72 1080 625 offer 2U
Glassman? 40 25 1000
Glassman PS/LH003R1.7J71 3 1700 USB Nice monster
Glassman PS/MJ03P5000-11 3 5 15
Oriel 70705 "PMT power"
Oriel 70706 -2 "ultrastable power"
Spellman X2287 50 4 75
Spellman X3000 30 0.4 12
Spellman X3210
4

2

1

2.5
Spellman DXM DXM20N600X4184 20 30 600
Spellman XLF XLF30N600X2274 30 30 900 500: broke, offer 2U
Spellman XLF XLF40N600X2559 40 15 600 800: offer 2U
Spellman XLF 50 12 600

Bertan PMC-C readily availible for PMT, GM tube type applications

Glass man PS/MJ03P5000-11 also good if you want a bit higher power

Bertan 225 is a common rackmount GPIB supply. As of this writing there is one make offer asking 350, but most are asking 700

Bertan

Now Spellamn

Raw supplies are unterminated. Consequently, surplus units will have any variety of connector attached

Connector: Amphenol/WPI 143-012-01

  • Found some on eBay. Can probably match something on Digikey

PMT supplies pdf

[1]

looks like my unit but different part number

Ex: PMT-10C-P ⇒ 0 - 1kV @ 4 mA

Option 1 vs option 3: option 3 allows negative rail in

Pin Function
1 GND
2 O3: VIN- -12Vdc to -18Vdc
3 VIN+ +24Vdc to +30Vdc or +12Vdc to +18Vdc
4 VIN+
5 O3: VIN+
6 O3: VIN-
7 POTCCW Reserved? My unit indicates its wiper ground
8 VPROG 0 to 9Vdc = 0 to 100% rated output, 100kΩ Zin
9 WIPE Internal program potentiometer wiper, 0 to 9Vdc
10 VREF +9V out voltage reference, ie for pot
11 MON
12 GND

mcmaster old unit

Found in MIT trash

Connector: WPI 143-012-01 9807

label

 BERTAN
 Hicksville, New York, USA
 
 CAUTION HIGH VOLTAGE
 0 to 1KV @ 4 mADC
 MODEL 2393A S/N 81285
 DATE CODE:
 OPTION 1
Connection Pins
B+ (+24 TO +30v) 3 OR 4
GROUND 1 OR 12
REMOTE POT CW TERM 10
REMOTE POT WIPER 8
REMOTE POT CCW TERM 7
METER (1V/100uA PER kV 11
 FOR INTENRAL HIGH VOLTAGE CONTROL
 JUMP PIN 8 TO PIN 9
 FOR REMOTE POTEIMETER CONTROL
 CONNECT RMEOTE POT AS SHOWN IN CHART.
 FOR REMOTE VOLTAGE PROGRAMMING
 APPLY 0 TO +9V TO PIN 8.

Cable:

Signal
GND Black
V+ Orange
VPROG White
MON Yellow