Hamamatsu C790

From Nucwiki
Revision as of 08:32, 22 November 2019 by Mcmaster (talk | contribs)
Jump to: navigation, search

mcmaster: got "X-RAY TV CAMERA" off of eBay missing cable. Both the camera and controller are marked C790-10 Was able to source something close to the needed CMC connectors and was able to retool for the proper cable. Now need to wire between them so I can boot the unit

All wires on connector are used (at least on camera side).

Camera

Appears to be vidicon? Hard to see...in a black sub-enclosure. Enclosure is marked ASSEMBLY XVC-4925

Boards:

  • OXVPOI-2 PRE AMP
  • OXPPOI-2 HV-POWER
  • OXVPO2-2 DEF FOCUS


Retrieved from "http://nucwiki.org/wiki/index.php?title=Hamamatsu_C790&oldid=296"