Difference between revisions of "Hamamatsu C790"
(Tag: Visual edit) |
(Tag: Visual edit) |
||
| Line 3: | Line 3: | ||
All wires on connector are used (at least on camera side). | All wires on connector are used (at least on camera side). | ||
| − | == Camera == | + | ==Camera== |
Appears to be vidicon? Hard to see...in a black sub-enclosure. Enclosure is marked ASSEMBLY XVC-4925 | Appears to be vidicon? Hard to see...in a black sub-enclosure. Enclosure is marked ASSEMBLY XVC-4925 | ||
Boards: | Boards: | ||
| − | * OXVPOI-2 PRE AMP | + | *OXVPOI-2 PRE AMP |
| − | * OXPPOI-2 HV-POWER | + | *OXPPOI-2 HV-POWER |
| − | * OXVPO2-2 DEF FOCUS | + | *OXVPO2-2 DEF FOCUS |
| − | <br /> | + | |
| + | Maybe 22 or 24 AWG on connector. Power pins don't appear to use a larger gauge than the rest.<br /> | ||
Revision as of 08:35, 22 November 2019
mcmaster: got "X-RAY TV CAMERA" off of eBay missing cable. Both the camera and controller are marked C790-10 Was able to source something close to the needed CMC connectors and was able to retool for the proper cable. Now need to wire between them so I can boot the unit
All wires on connector are used (at least on camera side).
Camera
Appears to be vidicon? Hard to see...in a black sub-enclosure. Enclosure is marked ASSEMBLY XVC-4925
Boards:
- OXVPOI-2 PRE AMP
- OXPPOI-2 HV-POWER
- OXVPO2-2 DEF FOCUS
Maybe 22 or 24 AWG on connector. Power pins don't appear to use a larger gauge than the rest.
