|
|
| (2 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | mcmaster: got "X-RAY TV CAMERA" off of eBay missing cable. Both the camera and controller are marked C790-10 Was able to source something close to the needed CMC connectors and was able to retool for the proper cable. Now need to wire between them so I can boot the unit
| + | moved to https://microwiki.org/wiki/index.php/Hamamatsu |
| − | | |
| − | All wires on connector are used (at least on camera side).
| |
| − | | |
| − | Japan imports DDK JMSP2528 connector 025-028 silver-plated 28 core aviation plug 4 thick needle 24 thin needle
| |
| − | | |
| − | "Hamamatsu Softex X-Ray TV Camera controller C3205": seems to use the same connector
| |
| − | | |
| − | "Hamamatsu C6086 X-Ray Camera Controller": for CCD I think, not compatible
| |
| − | | |
| − | Head: MODEL C790, TYPE 10, SER.NO 88054284
| |
| − | | |
| − | Controller: MODEL C790, TYPE 10, SER.NO 88074380
| |
| − | | |
| − | ==Camera==
| |
| − | Appears to be vidicon? Hard to see...in a black sub-enclosure. Enclosure is marked ASSEMBLY XVC-4925
| |
| − | | |
| − | Boards:
| |
| − | | |
| − | *OXVPOI-2 PRE AMP
| |
| − | *OXPPOI-2 HV-POWER
| |
| − | *OXVPO2-2 DEF FOCUS
| |
| − | | |
| − | | |
| − | Maybe 22 or 24 AWG on connector. Power pins don't appear to use a larger gauge than the rest.<br />
| |
Latest revision as of 07:12, 11 December 2019
