Difference between revisions of "Hamamatsu C790"
(Tag: Visual edit) |
(Tag: Visual edit) |
||
| Line 8: | Line 8: | ||
"Hamamatsu C6086 X-Ray Camera Controller": for CCD I think, not compatible | "Hamamatsu C6086 X-Ray Camera Controller": for CCD I think, not compatible | ||
| + | |||
| + | Head: MODEL C790, TYPE 10, SER.NO 88054284 | ||
| + | |||
| + | Controller: MODEL C790, TYPE 10, SER.NO 88074380 | ||
==Camera== | ==Camera== | ||
Revision as of 19:35, 28 November 2019
mcmaster: got "X-RAY TV CAMERA" off of eBay missing cable. Both the camera and controller are marked C790-10 Was able to source something close to the needed CMC connectors and was able to retool for the proper cable. Now need to wire between them so I can boot the unit
All wires on connector are used (at least on camera side).
Japan imports DDK JMSP2528 connector 025-028 silver-plated 28 core aviation plug 4 thick needle 24 thin needle
"Hamamatsu Softex X-Ray TV Camera controller C3205": seems to use the same connector
"Hamamatsu C6086 X-Ray Camera Controller": for CCD I think, not compatible
Head: MODEL C790, TYPE 10, SER.NO 88054284
Controller: MODEL C790, TYPE 10, SER.NO 88074380
Camera
Appears to be vidicon? Hard to see...in a black sub-enclosure. Enclosure is marked ASSEMBLY XVC-4925
Boards:
- OXVPOI-2 PRE AMP
- OXPPOI-2 HV-POWER
- OXVPO2-2 DEF FOCUS
Maybe 22 or 24 AWG on connector. Power pins don't appear to use a larger gauge than the rest.
